Clinical Guard
50E OLED Rechargeable Fingertip Pulse Oximeter - Sleep Study
50E OLED Rechargeable Fingertip Pulse Oximeter - Sleep Study
Couldn't load pickup availability
Details
Details
The 50E is a rechargeable pulse oximeter that features next generation design built to last with powerful technology to accurately measure oxygen saturation (SpO2) and pulse rate through your finger. With a built in alarm, you never need to worry about your oxygen falling without realizing it. The 50E includes both auditory and visual alarms to alert the user if the oximeter falls outside of the set limits programmed by the user, as well as alerting the user if the unit's voltage is low or if the unit is not correctly placed for proper measurement.
The bright, multicolor display makes reading your SpO2 an easy and enjoyable experience. The oximeter’s next generation display allows you to see your readings in 4 different directions. Additionally, the 50E comes with a rechargeable lithium-ion battery, doing away with the need of constantly replacing batteries that is typical in other units. The device charges when connected to a computer or connected to the power supply via power adapter.
The 50E has the ability to store 24 hours worth of data, and readings can be uploaded to a computer easily using the free software that is included with the device. Measurements can then be analyzed with the help of a medical professional or physician.
With the same size as a regular finger pulse oximeter, 50E provides many features that are only available for expensive hand held unit. It is ideal for COPD monitoring, sleep study, home healthcare spot-checking, and medical professional daily practice.
Features
Features
- Superb sleep study unit.
- Sleek, modern design.
- Powerful lithium battery charges when plugged into wall or computer
- Free software to upload and analyze up to 24 hours of data at a time.
- Automatic power-off after 5 seconds without signal
- Large Multicolor/Multi-directional OLED Display
- 4 parameters reading (SpO2, PR, Bargraph, and Pleth Waveform)
- Fast, accurate, continuous readings
- Can measure at low perfusion – SpO2 and PR can be measured properly when pulse saturation is at 0.4%
- Resistance to light interference
- Alarms(auditory and visual) when pulse rate or SpO2 falls below set levels
- Lightweight (About 50g with lithium battery)
- Easy to carry neck cord included
Package Contents
Package Contents
- 1x CMS 50E Fingertip Pulse Oximeter
- 1x Neck/wrist cord
- 1x USB Connector cord
- 1x 3.7V Rechargeable lithium battery
- 1x User manual
- 1x Carry case
Specification
Specification
- SPO2
Range: 0% - 99%
Accuracy: 70% - 99%, ±2%
0 - 69%, unspecified
Resolution: 1% - Pulse Rate
Range: 30bpm – 240bpm
Accuracy: ±2bpm or ±2%
Resolution: 1bpm - Power Supply
Requirement: 3.6 V DC ~ 4.2V DC - Battery Type:
Interior battery: 3.7 Voltage rechargeable lithium battery
Automatic power-off after 5 seconds - Environmental
Operating Temperature: 0°C ~ 50°C
Storage Temperature: -40°C ~ 60°C
Operating Humidity: 15% ~ 95%
Storage Humidity: 5% ~ 95%
Operating Pressure: 700hPa – 1060hPa
Storage Pressure: 500hPa – 1060hPa - Dimensions
Size: 57 x 32 x 30 mm
Weight: 1.8oz (50g with lithium battery) - Display
Type:OLED
Parameter: SpO2 (2-digit), PR (3-digit),
bargraph (6-segment), pleth waveform
Adjustable brightness level - Alarms Types:
Measurement out of set limits
Low voltage
Finger out of position
Please note that your doctor or healthcare provider is the best source for your treatment plan. This unit is not intended to replace a doctor's visit and self diagnostics.
